|
Product Details:
Payment & Shipping Terms:
|
| Body: | Aluminum | Core And Plugnut: | Stainless Steel |
|---|---|---|---|
| Core Spring: | Stainless Steel | Working Pressure: | 0.35-0.85Mpa |
| Sealing & Disc: | CR (chloroprene) | Diaphragm: | NBR(nitrile/buna-n) Or Viton |
| Diaphragm Seat: | PA-6 (standard) | Port Size: | 1 1/2" |
| High Light: | Diaphragm Pulse Valve,Dust Collector Pulse Valves |
||
Goyen Aluminum Romote control NBR diaphragm valve RCA45T 1 1/2 " pulse jet valve
The high flow, angle type bodies in combination with the special main diaphragm assemblies give the unique operating features required for dust collector service applications
The integral operators are provided with epoxy moulded F-class coils. Various optional waterproof and explosionproof solenoids for use in potentially explo- sive atmospheres (gas & dust) according to Directive ATEX 94/9/EC can be mounted on the same basic valve
Operation :
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater
Constuction Material:
| Body | Aluminium (diecast) |
| Seals | Nitrile or Viton (reinforced) |
| Spring | 304 SS |
| Screws | 302 SS |
| Clip | Mild steel (plated) |
| Locknut | Mild steel zinc passivated |
| Working Temperature | - 20 to + 85 ℃ |
| Working Pressure | 0.35-0.85Mpa |
| Diaphragm Seat | PA-6 or Viton coated mild steel or High Density PE |
| Sealing & disc | CR (chloroprene) |
| Diaphragm | NBR(nitrile/buna-n) or Viton |
| Shading coil | Copper |
Description
High performance diaphragm valve with threaded ports. Available with integral pilot or as remotely piloted valve. Outlet at 90° to inlet.
INSTAllATION:
| 1 | Spare parts kit and replacement coils are available |
| 2 | Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank. |
| 3 | Ensure tank and pipes are free from dirt, rust or other particulate. |
| 4 | Apply moderate pressure to system and check for installation leaks. |
| 5 | For compression fitting types tightness is achieved by the compressed gasket on the blow tube |
| 6 | Other pipe threads are available on request |
| 7 | Installation/maintenance instructions are included with each valve |
| 8 | Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only). |
| 9 | Fully pressurise system. |
| 10 | Test fire and listen for proper actuation and crisp pulse noise. |
Maintenance:
Before conducting any maintenance activity on the system ensure that components are fully isolated from
pressure and power supplies. Pressure and power should not be reapplied until the valve has been fully assembled.
Diaphragm and pilot inspection should be conducted annually
Suitable for
Dust collector applications, in particular for reverse pulse jet filter cleaning including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.
DIMENSIONS (mm) :
Product show:
Fitted Repair kits code: Diaphragm K4502 / K4503(Vition)
Contact Person: Mr. L
Fax: 86-187-1871-1052
